Home > Knowledge > Content
metallic seal gasket installation requirements
- Jun 15, 2018 -

1. The metallic seal gasket and the flange sealing surface should be cleaned, and there must be no defects such as scratches or spots that affect the connection sealing performance.

2. The outer diameter of the sealing metallic seal gasket should be smaller than that of the flange sealing surface. The inner diameter of the sealing metallic seal gasket should be slightly larger than the inner diameter of the pipe. The difference between the two inner diameters is generally 2 times the thickness of the sealing metallic seal gasket to ensure that the metallic seal gasket is tight after the compression. The inner edge does not extend into the container or pipe so as not to interfere with the flow of fluid in the container or pipe.

3, the sealing metallic seal gasket pre-tightening force should not exceed the design requirements, so as to avoid over-compression metallic seal gasket loses its ability to rebound.

4, when the metallic seal gasket is pressed tight, it is best to use a torque wrench. For large bolts and high-strength bolts, hydraulic tensioners are preferred. Tightening torque should be obtained by calculation according to the given sealing metallic seal gasket compression. The size of the hydraulic pressure of the hydraulic tensioner should also be determined by calculation.

5. When installing the metallic seal gasket, tighten the nuts in order. However, the design value should not be reached once. Generally, it should be circulated at least 2 or 3 times so that the stress distribution of the metallic seal gasket can be evenly distributed.

6. For pressure vessels and pipelines with flammable and explosive media, use safety tools when replacing the metallic seal gaskets to prevent the tools from colliding with the flanges or bolts, resulting in sparks, fire or explosion.

7. If there is a leak in the pipeline, it must be replaced after pressure relief treatment or adjusted installation metallic seal gasket, pressure operation is strictly prohibited.